It’s been few months now since I started the design and it is approaching the end \o/. The main body and legs are finally done, but I still have to do a final check of tolerances, clearances, cabling , mounting, etc.. before sending the parts for productions. As mentioned earlier, the design is very close to Rev2, however, the internal structure has been improved to be more rigid and more reliable. On Rev2, I had too much flexibility between parts and torsion on the body (due to the 5 parts body assembly) which basically ruined everything… The legs axles have also been redesigned or better performance and the legs will be equipped with a separate End-Cap (ground contact) with a rubber part to increase adherence.
So, hopefully I overcome all these issues with this version 😀
The ear design is also done and I think it gives a pretty nice look to the robot ! It will gives Animabot much more expression capabilities and at the end it doesn’t look to organic and not too mechanic either which I find to be a good compromise. In any case, it is difficult to make a functional machine looking organic when you have to install real motors, joints, PCBs, cables, etc..
I still have the dock to do, So this will be the next task…
The past weeks have been dedicated to the Head design which is coming along nicely 🙂 The head is slightly smaller than the actual version but contains more devices:
- Gesture sensor on top
- 2x OLED displays for the eyes
- 5Mpx Micro Camera
- 2x Servos for Ears
- 1x Servo for Head pitch
The head is divided in 2 parts in order to allow me to assemble the devices inside. Both part are screwed together and for the first time I will be using threaded inserts in order to have proper mounting 😉
The ears design will be done later, I want to have the complete robot designed to see how they fit with the rest of the body.
I already order some samples of the head to see the print quality and tolerances, I’m glad I did it because I already found several errors I have to correct for the final version. I could also do a test fit for the parts and it looks pretty fine as you can see:
The color is not the definitive one and I’m not sure about the Display color… but it gives a pretty good idea of the future look 😉
So, while I have been silent on the blog, I have been working hard on the design. Basically, Upper and Lower Bodies are done, only some few tweaks here and there to make all fit together. As you can see in the renderings below, the body shape is mostly the same but I fixed many issues from the previous body. These issues mostly came from the FFM 3D printing process (lack of precision and build volume and my beginner level in 3D printing at that time). The new robot will be printed with SLA process allowing more complex shape and better precision than before.
The Lower body contains the battery, Motherboard and Control Interface. The upper body is composed of 2 parts which allows me much easier assembly and better reliability. The upper body will be constantly screwed to its lower counterparts and the Upper Cover (where most of the devices are placed) will be screwed on the Upper body. As you can imagine, this will allow me to access all the internal part of the robot without removing the legs (which is currently a huge problem on the Rev2), by simply unscrewing the Top Cover. The Head, Rpi, servos are directly mounted on the Top Cover, and connected by only 3 cables to the Motherboard for easy assembly/access.
The Kinematic to lift the Rpi will be a nice feature allowing me to program and access it by the push of a button 😀 The tolerances are quite tight so I hope it will work as expected… This time I also added a small switch on top with RGB led in order to have some feedback/control over the robot (mode selection, battery level, etc..)
Lower Body – topview
Lower Body – bottomview
Upper Cover – Hood opened
Upper Body – Hood closed